LIMITED SPECIAL OFFER FOR FASTEST SAS RUNNING SOLID STATE DISK!

Get one free LSI 3442 SAS HBA for your host computer system with each purchase of USSD 200 SAS before June 30, 2008 (Terms and conditions subject to change without notice). LSI Logic is a SAS HBA leading vendor with a dominant market share of 80%.

The SAS interfacing combines use of the set of trusted SCSI commands with the accuracy and speed offered by serial connections. Solid Access is the first and only SSD supporting SAS conectivity on market today enjoying fast growing SAS storage adoption rate.

”By the end of next year, parallel SCSI is expected to account for a mere 7.3% of multi-user drive shipments, while SAS will garner about a 41% share, according to Gartner. Fibre Channel and SATA are expected to basically maintain their market shares, at 22.9% and 28.6%, respectively.” InfoStor, January 2007, Special Report

SAS features multi-lane connections so that, for example, x4 lanes in ”wide” port configuration provide a theoretical aggregate throughput of 12 Gbps. Arbitration overhead is low and the real world specs are very impressive. Solid Access recently clocked up to 55,696 IOPS and 760MBps throughput with the featured LSI 3442E HBA installed with host running Windows Server 2003.

Note: SAS is not backward compatible with SCSI. If you are using a parallel SCSI connectivity today and planning to switch to SAS down the road, there is no problem deploying a USSD 200 MP option with both HBAs (SCSI and SAS) installed since USSD 200 supports multiprotocol access.

The USSD 200 SAS model offers an exceptional value and is the Solid Access performance/price recommended leader.

For more information call 1-978-463-0642

CHECK FOR RECERTIFIED UNIT AVAILABILITY!

Solid Access sells recertified USSD units at discounted prices on a first come first served basis. Recertified units have been used for product evaluation purposes and may have minor cosmetic blemishes.

Recertified USSD units are tested to ensure they perform to original specifications. They are 100% functional units with complete documentation and are sold with the same product warranty and support as new USSD products. The label "recertified" is visibly displayed on each unit.

Quantities are limited. In the event that a specific configuration requirement is not immediately available, we will be glad to take your information and contact you should one become available in the future.

All confirmed and invoiced orders by Solid Access for recertified USSD units must be prepaid in full. For further details or to request resertified USSD 200 availability report, please contact us at recertified@solidaccess.com